oneConcept 10033077 Manual Del Usuario página 31

General Key Functions
"STEP SET / START / OFF" button:
• After plugging in, press the button once to SET Step 1 and press the button twice to
SET Step 2, Step 3 and Step 4
• After finishing EACH STEP SET for temperature, timer and power, hold down the
button to START
• When the machine is on "boiling" or "keep warm", hold down the button to turn
OFF the machine, and reset each step to run the brewer again
"POWER" button is to set the power between 500W - 2500W for boiling (changes by
100W each time it is pressed)
"TEMP" button is to set the target temperature between 30-140 °C (changes by 1 °C
each time it is pressed). If you want to change to °F hold down the button for three
seconds and change to target temperature 86-284 °F (changes by 1-2 °F each time it
is pressed)
"TIMER" button is to set the time from 1 min-99 min (changes by 1 min each time it is
pressed)
• SET- button is to lower the temperature/timer/power
• SET+ button is to increase the temperature/timer/power
Step 1
Press the "STEP SET / START / OFF"
button once. While the S1 light is on,
SET the temperature, power and timer
for S1
EN
31