Bunn MY CAFÉ Manual De Uso Y Cuidado página 9

CLEANING & MAINTENANCE
If Sprayhead and seal are separated during removal or cleaning, they must be
reassembled properly.
Identify the top of the seal – it will have
1.
rough ridges and the bottom is smooth
Identify the top of the Sprayhead – it has
2.
a star pattern and a threaded hole where
the Sprayhead attaches to the brewer.
While carefully stretching the seal, guide
3.
the Sprayhead into the channel of the seal.
When disassembling your brewer for cleaning, inspect the Sprayhead seal for cracks, tears
and holes. Although the seal should last for an extended period of time, damage can occur
through handling.
CAUTION: The seal confines hot liquid to the Pod Drawer. If damaged, call Customer
Service at 800-352-2866 or visit www.bunn.com to obtain a replacement seal.
Unplug the brewer and wait for it to cool. It must be stored above 32°F/0°C to prevent
damage to the internal water tank. If you do not use your brewer for an extended period of
time, we recommend running two to three cycles of water through prior to brewing coffee
or tea.
reassembling the sprayhead
inspecting the sprayhead seal
storing the brewer
Make sure it is completely in the channel.
When properly assembled, the Sprayhead
will slide easily into the channel of the
seal and will not cause any buckles in the
surface of the seal.
CAUTION: Improper reassembly could
result in personal injury from hot water.
7
/
seal