Commercial Electric 16508 Guía De Uso Y Cuidado página 8

Installation (continued)
4
Installing the infrared receiver
There are two installation options to choose from:
4A: Remove the protective tape from the adhesive back of the infrared receiver (A), then place the infrared receiver (A) into position
and press to ensure a proper adhesion to the surface.
4B: Use the two screws (AA) to install the infrared receiver into desired position.
CATION : A maximum of two 18 feet strips (36 feet total)
can be linked together using the same adapter.
4B
4A
A
NOTE :
b. The infrared receiver should face the remote (C).
Infrared receiver
60°
3 m / 9.84 ft
3 m / 9.84 ft
5 m / 16.4 ft
a.
B
Infrared receiver
Infrared receiver
b.
NOTE : Securely attach the end cap (CC) to the end of the LED
strip before operating.
Correct
Incorrect
8
CC