Rear Panel; Installation And Operation - Topp Pro Music Gear TPA-PLUS-BK Manual De Usuario

5

Rear Panel

120V Unit
230V Unit
8. APPLIANCE INLET
a. Heavy duty 14-guage power cord for connection between AC power mains (120V/60Hz) and the
power conditioner via it.
b. Heavy duty 0.75*3C power cord for connection between AC power mains (230V/50Hz) and the
power conditioner via it.
9. CIRCUIT BREAKER
a. Resettable 15 amp thermal circuit breaker.
b. Resettable 10 amp thermal circuit breaker.
10. 8 REAR PANEL OUTLETS
EMI/RFI filtered, spike/surge protected and switched.
11. "GND" SCREW
In case, the mains outlet not provide a ground conductor, this screw afters the possibility to ground
the unit metal parts never the less, you should leave procedure to the
electrician.
6

Installation and Operation

1. The power conditioner is the perfect accessorie for
any rack mount system. Install it in the top slot of a
standard 19-inch rack, and the 8 switched AC
outlets on the rear panel will provide full safety
protection to all your rack equipment.
equipment by combining a high voltage varistor
surge and transient suppressor with an RFI/EMI
interference filter. The filter helps prevent noise
from fluorescent lights, motors, and similar sources
of "electronic pollution" from contami-nating the
AC feed to your sensitive video, audio, tr or
computer circuit.
TOPP PRO
4 6
MUSIC GEAR
The conditioner protects your delicate electronic
experienced qualified