General Description - Nice Seld Manual De Instrucciones

2) GENERAL DESCRIPTION

SELD is battery powered which means, like all good transmitters, it needs no electrical
connection to the outside. Battery autonomy is more than 6 months but there is an acoustic
signal that will warn you when the battery is running down.
To guarantee this autonomy SELD remains in the "Waiting" state when it is not being used
so consumption is practically nil. Only when you press the key on the keypad will the
selector be activated and you can then enter the combination to transmit one of the two
codes.
After a few seconds of not being used SELD returns to the "Waiting" state.
To inform the user that the operation has been completed SELD has an acoustic signal that
sounds when a key is pressed.
2 consecutive notes sound to signal particular conditions (Error ... Battery running low...)
The keypad is backlit so the symbols on the keypad can be seen when SELD is active and
you are in places where there is no or poor illumination.
3) INSTALLATION
After verifying frequency and before actually fixing SELD, we recommend running a
practical test to check functionality and range so as to decide the best place for it.
When doing this, bear in mind that when the battery is running down there can be a
reduction in range equal to 25-30%.
- 18 -