Oki MJ-1108 Manual Del Usuario página 24

4. If the fall-prevention stopper touches the
floor or there is a gap of more than 10 mm,
perform [2] Adjustment Method.
[ 2 ] Adjustment Method
1. Remove the screws and take off the cover.
• Screws: 3
• Cover: 1
2. Loosen the height adjustment screws of the
fall-prevention stopper.
3. Adjust the height so that the gap between the
fall-prevention stopper and the floor is 3 to 10
mm.
4. Tighten the height adjustment screws of the
fall-prevention stopper.
© 2013 Oki Data Corporation. All rights reserved
24 / 25
MJ-1108 with KN-2550
45686246EE