Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SPECIAL RECOMMENDATIONS:
Install the unit on a flat surface free from any objects. The unit must be placed approx. 50 cm
from the wall.
The power cable plug must be easily accessible after installation of the cooler.
Always place the unit upright to avoid water spillage.
Do not cover air inlets and outlets.
Never use spray agents, such as insecticides, paints or other flammable products near the
unit as such products might lead to deformation of the housing. This also applies electronic
components inside the housing.
Do not operate the unit or do not touch the power plug with wet hands.
POWER SOURCE:
The power plug must be connected correctly and undamaged.
Do not connect the unit to a power source using an extension cable.
First, connect the device to the power source and then switch it on by pressing "0" switch.
IF THE ABOVE SAFETY RULES ARE NOT ADHERED TO, THE MANUFACTURE WILL NOT ACCEPT ANY LIABILITY FOR
ANY DAMAGE TO THE UNIT.
KEEP THIS MANUAL IN A SAFE LOCATION FOR FUTURE REFERENCE.
PRODUCT DESCRIPTION
vertical louvre
14
horizontal louvre
Water level indicator
Oscillation function
Air humidifying function
"0"
"0"
Air draught
speed control
Handle
Humid, cooling water filter
Castors
Cooling pack
Water tank
Water filter
Drain plug
Tabla de contenido
