Operation; Maintenance; Useful Information - Omcan DI-CN-0012-C Instrucciones

Functioning
• Make sure that the main switch is in the OFF position, plug in the machine.
• Before starting the machine, ensure that the bowls are properly closed with their covers.
• Turn the main switch to the ON position, the condensing unit will automatically start.
• To start the mixing action, turn the mixing system switch(s) to the ON position.
There is a switch for each bowl.
• To pour the drinks out, press the drinking glass lightly against the lever.
Beverage Temperature Adjustment
1. Every dispenser has been tested and the thermostat has been set at +5°C.
2. To adjust the temperature, lift up the plastic cover and turn the thermostat knob clockwise to set a lower
temperature.
Caution: Before adjusting the temperature, always remove the power plug. You are suggested not to
reset the temperature controller frequently.

USEFUL INFORMATION

For health standards and good quality of beverages, clean bowls, lids and the mixing paddles as often as
possible.
Cautions
• Before carrying out cleaning and refilling, remove the power plug.
• Do not use abrasive powders that might impair bowls and lid's shine.
• Use neutral soap and a little warm water to wash container, lid, mixing paddles, refrigerator tank and tap.
Rinse carefully with water in order to remove any residual of soap.
• To maintain a high standard of flavor, leave the dispenser turned on night and day in order to avoid deposit.
• If the dispenser is out of use for a long time, remove the power plug and clean carefully all parts. Keep the
dispenser away from dust and cover it with a plastic sheet.
SERVICING
Dispenser servicing is very simple. After disconnecting the dispenser, remove panels and clean inside parts,
especially condenser fins, with a brush. Dust reduces the performance of the machine, so clean at least once a
month.
DISASSEMBLING AND ASSEMBLING
• Disconnect the unit by removing the plug.
• Lift lid off.

Maintenance

7

Operation