Airzone innobus Manual De Usuario página 56

6. VENTILATION SPEED
(According to the installation)
If your installation is provided with air-conditioning production equipment with adjustable
ventilation speed (please check with your official installer), you will be able to select the
ventilation speed from the Master Thermostat.
ADVICE: Should your system be provided with this, Airzone
recommends to establishing an automatic speed set up. This
will allow the Airzone Innobus system to adjust the speed to
the number of zones required as well as the level of demand.
There are three speed levels to select from and they are
indicated by mnemonic codes F1 (F1), F2 (F2) and F3 (F3).
These and the system's time will be shown at intervals. Additionally to these three speed
rates, the system has an Automatic ventilation function, which is identified on the main
thermostat as Auto (AutO).
6.1. Selection of the Ventilation Speed
Please follow these steps in order to select
the ventilation speed required:
1) Wait until the main thermostat shows the
selected speed.
down until the speed selection screen
appears as shown.
2) Using the selection arrows, select the
required speed (AUtO, F1, F2 or F3) and
confirm by pressing the Airzone icon
once only.
7. TURN ON AND OFF THE ZONE AIR-CONDITIONING
In order to apply air-conditioning to any of the zones of the Airzone Innobus system, you are
required to turn on the zone. To do this, simply press on the On/Off icon once only. The
selected set point temperature and the selection arrows to modify it will appear. When the
thermostat is turned on the symbol for Manual Operation Mode (a hand above the On/Off
icon) will appear.
NOTE: If your device allows for the viewing of the room temperature, after a few seconds the
selection arrows will disappear and the room temperature will be displayed.
56
All manuals and user guides at all-guides.com
Then press and hold
Fig. 12 - Master thermostat
with automatic speed set up
Fig. 13 - Ventilation speed set up
Fig. 14 - Selection of the ventilation speed
Set up speed
using the
selection arrows