Final Check - Össur UNLOADER HIP Instrucciones Para El Uso

obtain adequate tension with SmartDosing at the "5" mark
Thigh Strap (Figure 8–9)
• Position Thigh Strap so that dot on thigh strap is positioned over dot
on Rotation Control Strap. Thread slim end through opening and
fasten securely
Pulley System Adjustment (Figure 10–12)
• Verify length of Pulley System strings by pulling at handles and
attaching on Belt Arms
• If the handles overlap, shorten string by using the spooling system
located inside handles
• Fasten Pulley System so that it sits tightly and comfortably on
Belt Arms
Trochanter Pad (optional) (Figure 13)
Apply pad when peak pressure reduction on greater trochanter is needed
and/or to increase sealing effect on labrum
• Position Trochanter Pad on the greater trochanter of the affected hip
by attaching it to velcro under Belt Arm

FINAL CHECK

Verify that brace is sitting correctly on body, with all parts accurately
positioned. Ask patient to walk around, sit down and stand up to ensure
proper fit. Adjust as necessary, then proceed to cut straps and belt arms
to ideal length
MAINTENANCE
• Hand wash using mild soap and rinse thoroughly or machine wash,
using wash bag and a delicate program (no fabric softener)
• Avoid prolonged contact with salt and chlorinated water, rinse well in
case it occurs
• Avoid prolonged exposure to strong sunlight
• Air dry (no tumble dry)
7