Tabla de contenido
Idiomas disponibles
Idiomas disponibles
OPERATION
1. Turn on the audio source (TV or audio component) to which the transmitter is
connected with. The blue signal LED on the transmitter will light up.
2. Select the channel 1 or 2 of the transmitter for best performance in your
location.
3. Turn on the ON/OFF button on the speakers (the ON/OFF button on the remote
control unit cannot be used as a primary device to switch on the speakers).
Press the "AUTO TUNE" button to get the best tuning reception in the speakers.
When the button is pressed, frequency tuning starts automatically and it stops
when a signal is detected. Tuning process can also be activated by pressing the
"AUTO TUNE" button on the remote control unit.
4. Volume can be adjusted up by pressing "+" button or
down by pressing the button "-" to the desired listening
level, or you can press the "+" button or "-" button" on
the remote control unit to adjust the volume level.
NOTE :
a). Keep a distance of the speakers up to 7 meters
apart from the transmitter, and then press "AUTO
TUNE" button for the best reception.
b) Whenever you find frequency jam, move your channel switch from one
channel to the other channel (there are two channels for selection) on the
transmitter, and then press the "AUTO-TUNE" button again.
P.5
Tabla de contenido
