Troubleshooting Guide - Listo RDL 130-50b4 Instrucciones De Uso

IMPORTANT: When the plastic parts of the refrigerator remain stained with oil for a
long time (animal or vegetable), they deteriorate easily and can crack. Clean and wash
the dirty parts with hot water immediately.
The drainage mechanism can get dirty very easily and cause unpleasant odours; get
into the habit of cleaning it regularly (see the "Cleaning" section).
f
ixing A mAlfunCtion
A malfunction may be due to a minor problem that you can solve yourself using the
instructions in the following table. Before calling a technician, perform the following
checks:
Problems
The appliance is not wor-
king.
The appliance cools down
too much.
The interior lighting is not
working.
A large amount of frost is
forming; sometimes even
on the door seal.
V.1.0

TROUBLESHOOTING GUIDE

Possible causes
The thermostat is in the
"Off" position.
The plug is not plugged in
or is improperly plugged
in.
A fuse has blown or is de-
fective.
The electrical socket is
defective.
The thermostat is set to
a temperature that is too
cold.
The bulb is defective.
Replace it.
The door seal is leaky (pe-
rhaps after reversing the
direction the door opens).
32
Solutions
Turn the thermostat knob
to 4.
Plug the plug into the soc-
ket.
Check the fuse and replace
it if necessary.
Repairs to the socket should
be done by an electrician.
Temporarily set
thermostat to a warmer
temperature.
Please refer
"Changing the
section.
Carefully heat the leaking
seal sections with a hair
dryer (set to cool). At the
same time, correct the
position of the door seal
with your hand.
the
to the
bulb"