Conceptronic CWIFIS Guía De Instalación Rápida página 5

ENGLISH
1 Introduction
The Conceptronic WiFi Sensor is a smart dual function detector for
Wireless AccessPoints (hotspots) and hidden cameras (VideoSenders).
Detecting distance is about 50 meters.
2.1 How to use the WiFi Sensor: (WIFI mode)
Push the slide switch to WiFi
Press the button once. The RED LED will start to search for
hotspots for about 60 seconds.
After a few seconds:
- RED LED Flashing: there are no WiFi (802.11b/g) signals
detected or the signal is very poor.
- RED LED stays on: a week wireless signal is detected; a
wireless connection may be available but will not be
stable.
RED & YELLOW LEDs stay on: a good wireless signal is
-
detected. A wireless connection can be made
RED & YELLOW & GREEN LEDs stay on: a strong wirless
-
signal is detected. A wireless connection can be made
After 1 minute the WiFi Sensor will stop detection automatically.
2.2 How to use the WiFi Sensor: (Cam Sensor Mode)
Push the slide switch to Cam Sensor
Press the button once. The RED LED will start to search for
Videosenders for about 45 seconds.
After a few seconds:
RED LED Flashing: there are no wireless surveillance /
-
camera signals detected.
RED LED stays on & there is a long interval beep sound, this
-
means a weak wireless surveillance/camera signal is
detected.
RED & YELLOW LEDs stay on & there is a long interval beep
-