Tabla de contenido
Idiomas disponibles
Idiomas disponibles
User's Guide
3. Press
to calculate the piece weight.
4. The input data will be cleared in 4 seconds if
SETUP PIECE WEIGHT BY SAMPLING _ METHOD 2
1. Make sure the piece weight is empty.
2. Press
, the second row of LCD shows SAMPLE and the third row of LCD shows default value as
100.
3. Press the numeric and decimal keys to enter the new sampling quantity.
4. Place objects of desired piece counts on the weighing pan. The piece weight will be calculated auto-
matically.
Note: If the weighing is on B scale (external), after
A scale automatically.
SETUP PIECE WEIGHT BY SAMPLING _ MÉTODO 3
1. Make sure the piece weight on the display is zero.
2. Put certain objects on the weighing pan.
3. Press
, the second row of LCD shows SAMPLE and the third row of LCD shows default value as
100.
4. Press the numeric keys to enter the new sampling quantity.
5. Remove the objects by desired piece counts from the weighing pan. The piece weight will be calcu-
lated automatically.
Note: If the weighing is on B scale (external), after
A scale automatically.
SETUP PIECE WEIGHT BY SAMPLING _ MÉTODO 4
If the piece weight has not been cleared, you may add or remove weight and press
the piece weight again.
AUTO RE-SAMPLE OPERATION
After a successful sampling operation, the scale will automatically sample again on the A scale for any
new small weight.
Placing new weight onto the weighing pan will automatically sample again.
Auto Re-sample function can be disabled in CAL 1 settings menu.
PLU DATA SETTING
Steps in setting direct PLU keys 1~24
1. Set up piece weight as in Sampling Operation section.
2. Press
, and you should see
3. Select your desired PLU number from the direct PLU keys.
4. Press
to save your setting.
34
is not pressed.
is pressed, the sampling job will be continued on
is pressed, the sampling job will be continued on
flashing.
will stop flashing.
IKP model
to calculate
4. PLU OPERATION
Tabla de contenido
