Beko BWH 50 EUC Manual De Instrucciones página 27

②
Connection of pressure relief valve with the heater on the inlet of the water heater.
In order to avoid leakage when connecting the pipelines, the rubber seal gaskets provided with
③
the heater must be added at the end of the threads to ensure leak proof joints (see Fig.4).
Hot water outlet
Rubber seal gaskets
Screw for hot water outlet
Adjusting handle for
mixing valve
④
If the users want to realize a multi-way supply system, refer to the method shown in fig.5 and
fig.6 for connection of the pipelines.
Triple joint
Water pool
Please be sure to use the accessories provided by our company to install this electric
water heater. This electric water heater can not be hung on the support until it has been
confirmed to be firm and reliable. Otherwise, the electric water heater may drop off from
the wall, resulting in damage of the heater, even serious accidents of injury. When
determining the locations of the bolt holes, it shall be ensured that there is a clearance
not less than 0.2m on the right side of the electric heater, to convenient the maintenance
of the heater, if necessary.
Cold water inlet
Rubber seal gaskets
Pressure relief valve
Pressure release hole
Joint screw for cold water inlet
Shower nozzle
Hot Cold
water
water
outlet
inlet
Mixing valve
NOTE
6
Power cord
Power cord
Main machine
Pressure relief valve
Water inlet valve
Shower nozzle
Water inlet valve
Running water pipe
(Fig.4)
(Fig.5)