Safe Care & Maintenance / Consumer Affairs; Safe Identification Record - First Alert 1037275 Guía De Instalación Y Operación

Safe Care and Maintenance / Consumer Affairs
LOW BATTERY INDICATOR
Every time the keypad is activated, the system automatically checks the power
level remaining in the batteries. If the power falls below a certain level, the
keypad will beep and flash yellow when a key is pressed.
SAFE CARE & MAINTENANCE
When properly maintained, your safe will continue to operate accurately for
many years. In order to ensure optimum performance of your safe, please follow
these simple precautions:
Battery Maintenance
Always purchase and use the batteries as specified by this User's manual.
1
Always replace all batteries at the same time. It is recommended to replace
2
all batteries at least once a year or sooner depending on amount of use.
Always clean the battery contacts in the battery compartment and on the
3
batteries before installing new batteries.
Always make sure all batteries match the polarity (+ and -) signs in the open
4
battery compartment.
If your safe will not be used for an extended period of time, it is
5
recommended that you remove the batteries.
Always promptly remove and properly discard of all used batteries.
6
DO NOT MIX OLD AND NEW BATTERIES
DO NOT MIX ALKALINE, STANDARD, OR RECHARGEABLE BATTERIES
Clean Hands - Never attempt to operate the digital keypad if your hands have
excessive dirt, debris or liquids on them.
Clean Safe – To clean the surface of your safe, it is recommended that you use a
mild cleaner (e.g., window cleaner) to avoid scratching or discoloring the surface.
Always wipe dry and NEVER use abrasive cleansers on the safe or digital keypad.
CONSUMER AFFAIRS
YOUR SAFE'S UNIQUE IDENTIFICATION NUMBERS
When contacting Consumer Affairs, you should be prepared to supply some
important information that specifically identifies your safe. This information is
extremely important to assuring prompt and accurate assistance.
It is strongly recommended that you identify and record the following
information in the Safe Identification Record form located on page 8
MODEL NUMBER
7
KEY NUMBER
MODEL NUMBER
®
The First Alert Safes product line consists of many different models, each
identified by a specific Model number. Every model is manufactured with unique
capabilities and features that may require specific solutions to a variety of
difficulties that occasionally occur.
KEY NUMBER
The Key Number is necessary to identify the specific configuration of the key and
lock cylinder components of your safe. If a key becomes damaged or misplaced,
the Key Number is required in order for you to receive a replacement key.
LOCATING KEY NUMBER
The Key Number is engraved on the keys and around the lock cylinder.
HOW TO OBTAIN WARRANTY SERVICE
If service is required, do not return the product to your retailer. In order to obtain
warranty service, contact Consumer Affairs at 1-800-323-9005. To assist us in
serving you, please have the model number and date of purchase
available when calling.
IMPORTANT: DO NOT RETURN SAFE TO STORE
If you have any questions pertaining to proper use,
DO NOT RETURN safe to the store.
Please contact Consumer Affairs at 1-800-323-9005.

SAFE IDENTIFICATION RECORD

Model Number
Key Number
Digital Passcode Record
Serial Number
Safe Identification Record
!
8