Cadet BTF Serie Instrucciones Para La Instalación

BTF Series Thermostat
BTF1
BTF1TP
TOOLS REQUIRED
Phillips Screwdriver Wire Connectors
• •
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury
to persons, including the following:
Read all instructions before using this heater and thermostat. See our How-To Video at http://cadetco.com/installationvideo.php
All electrical work and materials must comply with the National Electric Code (NEC), the Occupational Safety and Health Act (OSHA),
and all state and local codes.
Turn the electrical power off at the electrical panel board (circuit breaker or fuse box) and lock or tag the
panel board door to prevent someone from turning on power while you are working on the heater. Failure
to do so could result in serious electrical shock, burns, or possible death.
If you are uncomfortable working with electrical appliances, unable to follow these
guidelines, or do not have the necessary equipment; consult a licensed electrician.
www.cadetco.com
InstallatIon InstructIons
Straight Screwdriver
•
ImporTanT InSTrucTIonS
W RNING
Save TheSe InSTrucTIonS
Tel: 360-693-2505
The BTF series heater mount
thermostat for Cadet electric
baseboards can be used to control
a baseboard heater at the unit.
Designed to replace the detachable
baseboard end plate, the BTF easily
installs onto either end of a Cadet
F-series baseboard heater.
BTF2
The BTF line voltage thermostat
is capable of switching up to
22 amps, of a resistive load,
at 120, 208 or 240 VAC. Setpoint
temperature range: 45º - 80ºF.
Temperature Set Position
BTF2TP
CONTROLS
Turn knob counter-clockwise for cooler room
temperature. Turn knob clockwise for warmer
room temperature.
p.o. Box 1675 vancouver, Wa 98668-1675