Charging The Batteries - Bematech DC-2000 Guía De Referencia Rápida

3.2 Charging the Batteries

After inserting the batteries, put the Data Collector on its cradle and, through
the Power Source, connect it to the power plug and charge it until the Indicator
LED turns green. The first recommended charge time is around 12 hours.
3.3 Turning on the Data Collector
After charging the Data Collector, turn it on through the red Power Button (PW),
located in the lower part of the product.
PW
4. Connecting to the Computer through USB interface
To connect the Data Collector to the computer, follow the steps ahead:
1. Put the DC-2000 on its cradle
2. Plug the USB cradle cable in your computer
3. Turn the Data Collector on and leave it on the screen showed ahead, selecting
it through the "M1" Button:
12