Idiomas disponibles
Idiomas disponibles
PARTS DESCRIPTION.
1: Front grille.
2: Nut to fix the blades.
3: Blade.
4: Back grille.
5: Mounting nut.
6: Front motor cover.
7: Swing button.
8: Rear motor cover.
9: Stand.
10: Control Keyboard.
ASSEMBLY.
1. Remove the mounting nut (5).
2. Insert the rear grill (4), replace the mounting nut (5) and tighten.
3. Insert the blades (3) into the motor shaft. Put the retaining nut (2) and tighten.
4. Align the front grille (1) to the rear grille (4) and close the fixing tabs.
OPERATING INSTRUCTIONS.
1. Place the fan on a dry, clean, firm and level surface.
2. Plug the cable into a standard 220-240V ~ AC power outlet.
3. To turn on the fan, press the desired speed switch.
4. (Button 1: low speed. Button 2: medium speed. Button 3: high speed)
5. To turn off the fan, press the "0" switch.
6. Head swing: Activated with the oscillation button (7) below.
CLEANING AND MAINTENANCE.
Follow these instructions to take care of your fan correctly and safely.
• Always unplug the fan before cleaning or disassembling.
• The engine or any part of the fan should never get wet.
• To clean it, only use a soft cloth dampened in water with neutral soap.
• Never use abrasive cleaning products.
FAN STORAGE.
Your fan can be stored other partially disassembled or assembled. It is important to keep it in a safe, dry
location. If stored disassembled, we recommend using the original (or appropriately sized) box.
Disabled with the rocker button (7) above.
