Tabla de contenido
Idiomas disponibles
Idiomas disponibles
•
For instructions on specifying the IP address manually, refer to the
the U.S. Robotics Installation CD-ROM.
Windows 2000 users:
Click Windows Start > Settings, then click Network and Dialup connections.
1.
2.
Double-click the Local Area Connections icon and select Properties.
3.
Select the TCP/IP line that has been assigned to your network card and select Proper-
ties.
4.
Configure IP addressing:
•
To obtain the IP address automatically through the DHCP server:
Click the IP Address tab, select Obtain an IP address automatically and click
OK > OK. This is the preferred method for configuring PCs.
•
For instructions on specifying the IP address manually, refer to the
the U.S. Robotics Installation CD-ROM.
Windows NT users:
Click Windows Start > Settings > Control Panel.
1.
2.
Double-click the Network icon.
3.
Click the Protocols tab and select the TCP/IP line that has been assigned to your net-
work card.
4.
Click the Properties button.
5.
Configure IP addressing:
•
To obtain the IP address automatically through the DHCP server:
Click the IP Address tab and select Obtain IP address from a DHCP server and
click OK > OK. This is the preferred method for configuring PCs.
•
For instructions on specifying the IP address manually, refer to the
the U.S. Robotics Installation CD-ROM.
Windows Me, 98, or 95 users:
Click Windows Start > Settings > Control Panel.
1.
2.
Double-click the Network icon.
Click the Configuration tab and select the TCP/IP line that has been assigned to your
3.
network card.
4.
Click the Properties button.
5.
Configure IP addressing:
•
To obtain the IP address automatically through the DHCP server:
Click the IP Address tab, select Obtain an IP address automatically and click
OK > OK. This is the preferred method for configuring PCs.
•
For instructions on specifying the IP address manually, refer to the
the U.S. Robotics Installation CD-ROM.
You can use the ping command to verify whether your PC has successfully connected to the
router. For ping command instructions, refer to the
CD-ROM.
8
User Guide
on the U.S. Robotics Installation
User Guide
on
User Guide
on
User Guide
on
User Guide
on
Tabla de contenido
