Removing The Seat Cover; Maintenance And Cleaning - Be Cool Tornado I-Fix Manual Del Usuario

EN

10 -REMOVING THE SEAT COVER

10.a Removing the headrest covers by pulling the cover forward
and off.
10.b Removing the wings by pulling the cover forward and off.
10.c Departing the backrest from the base by making the seat
flat and detach the connection opint of the two parts.
10.d Removing the base by pulling the cover forward and off.
11 -REPLACING THE SEAT COVER
11.a Sliding the base cover onto each armrest, and then pull the
cover over the front and down around the back of the base.
11.b Mounting the backrest by connecting opint of the two parts.
11.c Sliding the cover down, over each side impact system to
secure the edge of cover is in the gap of the wings.
11.d Sliding the headrest cover over the headrest to secure the
edge of cover is in the gap of the headrest.

MAINTENANCE AND CLEANING

STORAGE
1) Store this child car seat in a safe place when not in use.
2) DO NOT place heavy objects on top of it.
3) Always store the child car seat in a dry environment.
4) DO NOT store the child car seat near a direct heat source such
24
as a radiator.
IM 2013,01 TORNADO_IFIX ins OK.indd 24
COVERS
1) The seat cover is easily removable and should be handwashed
with a pH neutral soap and cold water.
2) Do not press, iron, dry clean, tumble dry or wring the covers.
3) Do not use solvents, caustic or abrasive cleaning materials.
4) Dry flat, away from direct heat and sunlight.
5) If the seat covers need to be replaced only use certified parts.
They are the only ones that are guaranteed to have been safety
tested and designed to fit this seat.
PLASTIC/METAL PARTS
1) Wipe clean using a mild soap and warm water.
2) You must not remove, dismantle or alter any part of the seat
shell.
3) You must not oil or lubricate any part of the seat shell.
INSPECTION
1) Check your child car seat regularly for wear and tear.
2) The child car seat may have a slight rattle when not in use, this
is normal. If in any doubt, contact us immediately.
3) Check the adjustable parts of your child seat at intervals of
about 6 months to ensure it is still fits correctly for your growing
child.
19/6/18 19:24