Tabla de contenido
Idiomas disponibles
Idiomas disponibles
POWER SOURCE
This unit is designed to be operated on AC/DC.
AC Operation
Plug the smaller end of AC power cord into AC jack on unit and the other
bigger end into household AC wall outlet. The batteries will be automatically
disconnected. For dual voltage version, make sure that the AC VOLTAGES
ELECTOR is switched to your local voltage.
DC Operation
Open the BATTERY COMPARTMENT DOOR. Install 8 pcs UM-1/D size
batteries (not included) into compartment. Please follow correct polarities as
indicated.
CAUTION
Remove batteries if they are exhausted or not being used for a long time.
Batteries contain chemical substances, so they should be disposed of properly.
BASIC FUNCTION
Turning on the unit
Press the STANDBY/FUNCTION button on unit or press the STANDBY key on
remote control, then press the STANDBY/FUNCTION button on unit or
FUNCTION key on remote control to choose FM or AM or BT or TAP or CD or
USB mode.
Volume adjusting
Press the electronic VOLUME UP/DOWN button on unit or on remote control
to increase or decrease volume.
Press MUTE button on remote control to turn off the sound. Press again to turn
on.
REMOTE CONTROL OPERATION
To operate the unit with the remote control, point
the remote handset at the remote sensor on the
front panel and press the appropriate button on the
remote handset.
The remote works best within a range of 6 ~ 7
meters from the front panel and on an angle of 30
degrees. Bright sunlight or room light conditions can
interfere with the remote control. If the remote
operation is unsatisfactory or stops working entirely,
first try replacing the remote batteries, then try
reducing the room lighting conditions.
11
Tabla de contenido
