Tabla de contenido
Solid Concrete and
Concrete Block Wall Mounting
CAUTION:
Improper use could reduce the holding power of the lag bolt. To avoid potential injuries or property
damage:
Pilot holes MUST be drilled to a depth of 75 mm (3 in.), using a 10 mm (3/8 in.) diameter drill bit.
Be sure the anchors
Mount wall plate directly onto the concrete surface.
Never drill into the mortar between blocks.
DO NOT over-tighten the lag bolts
Minimum solid concrete thickness: 8 in.
Minimum concrete block size: 8 x 8 x 16 in.
Minimum horizontal space between fasteners: 406 mm (16 in.)
18
Step 1
18
18
Level wall plate
and
mark the hole locations.
Step 3
Insert lag bolt anchors
44
seat flush with the concrete surface.
42
.
x1
406 mm
(16 in.)
44
44
5/16 x 2¾ in.
42
43
x4
Step 2
Step 4
42
Tighten the lag bolts
until the washers
.
firmly against the wall plate
22
OPT
x4
44
x4
Drill pilot holes as
illustrated.
43
42
only
43
are pulled
18
75 mm
(3 in.)
18
.
Tabla de contenido
