Using A Call Alert; Locking The Keypad - Insignia NS-F1112 Manual De Instrucciones

Insignia NS-F1112 Two-Way Radio

Using a call alert

Your radio can transmit a call alert for a fixed length of time.
To send a call alert:
• Press the Call/Lock button. The TX icon appears while
transmitting a call alert. The alert can be heard on the speaker.
To choose a call alert:
1 Press the Power/Menu button until a CA icon appears
accompanied by the current call alert setting.
2 Use the Up or Down button to select one of the five alerts.
3 Press the PTT button to save your selection.
Scanning
Your radio can scan all of the 22 channels to check for any activity.
When you are scanning, the SCAN icon appears on the display.
To scan for activity:
• Press the Monitor/Scan button. Your radio scans each of the
22 channels and stops on any active channel for about four
seconds before resuming the scan.
To stop scanning:
• Press the Monitor/Scan button.
To stop scanning on a channel and transmit:
• Press the PTT button to transmit on an active channel.
To resume scanning:
• Press the Monitor/Scan button.

Locking the keypad

Lock the keypad to avoid accidentally changing the radio settings.
To lock the keypad:
• Press Call/Lock for four seconds. The Key Lock icon appears
on the display. When the keypad is locked, the PTT button and
the Call/Lock buttons are active.
To unlock the keypad:
• Press the Call/Lock button for four seconds.
www.insignia-products.com 9