IMPORTANT SAFETY INFORMATION
Read and understand this manual fully before using the
sawhorse and observe all safety precautions. Non observance
of safety precautions may result in injury. Keep this manual
safe for future reference.
Before using the sawhorse always check that all nuts and
bolts are secure and that the sawhorse is not damaged.
Use the sawhorse on firm level ground only. Do not use on
sloping or uneven ground.
After securing a log in the sawhorse, check the stability and
balance before starting to cut. The sawhorse must not be
able to tilt.
Never hold the chain close to the chain tubes or place your
fingers in the chain links.
Read and observe the operating instructions of the chainsaw
you are using and wear all recommended safety gear. Always
wear safety shoes or boots in case a log is accidentally
dropped on your feet.
Only cut with the bottom of the chainsaw bar as the log
may otherwise shift away from the rotating chain, become
unstable and increase the risk of personal injury.
Clear and stack the sawn logs away from the sawhorse to
keep the work area clear of obstructions and safety hazards.
WARNING: Do not exceed the specified maximum log length
and maximum log weight as given on page 2 of this manual.
Ultimate Sawhorse
13