Tabla de contenido
Idiomas disponibles
Idiomas disponibles
P ANEL INSTRUCTIONS
Rear Panel
5
4
4
2
1
2
1
3
1. Channel A / Channel B Input XLR
Standard XLR balanced jack.
Pin 1: ground, Pin 2: signal +, Pin 3: signal -
2. Channel A / Channel B Signal Link Output
Standard XLR (male) socket for input signal link, its Pins parallel connected with the
female XLR socket so you can feed the same signal to another amplifier.
Pin 1: ground, Pin 2: signal +, Pin 3: signal -
3. Output Mode Set Switch
Select the run mode as STEREO or BRIDGE
4. Channel A / Channel B Output Speakon
OUTPUT CHANNEL A
CH.A: POS:1+ NEG:1- CH.B: POS:2+,NEG:2- BRIDGE: POS:1+,NEG:2+.
OUTPUT CHANNEL B
CH.B: POS:1+,NEG:1-.
5. Main Power Supply Cord
Use this socket to connect to the main power supply only with the cable provided by
the manufacturer. In case of break or loss refer to the authorized service to know why
replace cable. At the bottom of the chassis is a switch to change the input voltage.
Make sure it is in the correct position in concordance with their region.
5
www.novikneo.com
Tabla de contenido
