Assembly And Connection - Kompernaß KH 4232 Instrucciones De Uso

Minibomba para taladro
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

Assembly and connection

Assemble the mounting
as shown in the illustration.
Alternatively, the mounting
with screws (assembly material not supplied).
When using the short drive shaft e ...
Screw the short drive shaft
Insert the electric drill
Now push the pump
projects into the chuck and the pins of the mounting
reception holes on the pump
Now tighten the chuck with the chuck key through the recess
that the pump
Tighten the cross-headed screw on the mounting
u
cannot jolt around.
Attach the suction hose to the connection
connection
a
q
pump
.
When using the long drive shaft r ...
Attach the long drive shaft
Insert the electric drill
chuck, into the mounting
Tighten the cross-headed screw on the mounting
cannot jolt around.
y
with the clamp fastening
y
e
onto the drive shaft
u
with the chuck into the mounting
q
onto the mounting
q
q
can no longer release itself from the mounting
. Pay heed to the direction of flow
r
into the chuck.
u
, with the pre-assembled drive shaft
y
.
can also be secured to a work surface
y
so that the drive shaft
.
o
and the pressure hose to the
y
- 35 -
t
onto a work surface,
w
of the pump
y
.
y
are located in the
i
so firmly
y
y
firmly, so that the drill
detailed on the
r
in the
firmly, so that the drill
q
.
e
.
u
Tabla de contenido
loading

Tabla de contenido