Tabla de contenido
Idiomas disponibles
Idiomas disponibles
3.
Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. Remove template
IMPORTANT: Be sure to drill into the center of the stud.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm).
4.
Install arm assembly
08
CAUTION:
Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts
3
using two lag bolts
. Tighten the lag bolts only until they are pulled firmly against the wall plate.
09
3 in. (75 mm)
7/32 in.
(5.5 mm)
.
07
4
07
.
09
09
08
09
11
Tabla de contenido
