Holman QCS Serie Instrucciones De Instalación Y Operación página 3

COOKING PROCEDURES
BREAD TOASTING
Some toasters are equipped with a swinging heat shutter at the toaster
entrance. This shutter will move out of the way as the product passes
under it.
1) Turn the power saver to FULL POWER.
2) Set the conveyor speed to HIGH.
3) If your toaster is equipped with separate top and bottom heat
controls set them both at HIGH (QCS2 & 3 Only)
4) Allow warm up time of 5 to 10 minutes.
5) Place a sample product on the conveyor belt to test the settings.
•If toasting is too light, turn conveyor speed control counterclockwise to a
slower speed.
•If toasting is too dark, turn heat control to a lower heat.
(NOTE: Some products may require adjustment of the top and
bottom heat controls in order to achieve the desired results)
TOASTER COMPONENTS
LOAD UP
CRUMB TRAY
UNLOAD TRAY
HEAT CONTROLS
(QCS2 & 3)
POWER
SAVER SWITCH
SPEED CONTROL
FRONT
HIGH LIMIT RESET
AIR INTAKE FAN
POWER CORD
IL1141