Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Side
Burner
Valve
Valve
Nozzle
Side Burner
Control Knob
Side Burner
Igniter Lead
Burner Venturi
Bezel
Stop Pin
Electrode
Step 5
Remove two M4 bolts and spring
washers from the side burner valve.
Insert the side burner valve
assembly through the hole in the
side burner table base, then firmly
seat the valve nozzle into the
burner venturi. Hold in place while
you perform Step 6.
WARNING: Never use your grill
without leak testing all
gas connections and
hoses. See the section
on "Leak Testing" in
this manual for proper
procedures.
Step 6
Place the bezel over the control
knob mounting stem and position
over holes in side burner base and
side burner valve assembly. Attach
with two M4 X10 mm bolts with
spring washers which come with
the valve. Then install the side
burner control knob onto valve
stem.
Note:
Align bezel with stop pin
toward bottom as shown.
Step 7
Attach side burner igniter lead wire
to the electrode as illustrated.
26
Capítulos
Tabla de contenido
