gopart FGP455236GP Manual Del Usuario página 9

ASSEMBLY OF HOPPER BAG
1. (Figure 10) Turn a rear hopper tube so that the brace holes in the middle of the tube face down. Slide the tube through
the two loops sewn to the top rear seam inside the hopper bag.
INNER BAG LOOPS
REAR HOPPER TUBE
(brace holes on bottom)
2. (Figure 11) Insert the two upper hopper side tubes through the stitched flaps on each side of the hopper bag.
3. (Figure 11) Assemble the ends of the rear hopper tube onto the ends of the upper hopper side tubes.
4. (Figure 12) Turn the second rear hopper tube so that the brace holes in the middle of the tube face up. Assemble the
ends of the rear hopper tube onto the ends of the lower hopper side tubes. Fasten together using plastic plugs.
PLASTIC PLUG
10
UPPER HOPPER
SIDE TUBE
REAR HOPPER TUBE
(brace holes on top)
LOWER HOPPER
SIDE TUBE
PLASTIC PLUG
12
11
UK
9