tucanourbano Opossum Manual Del Usuario página 12

2. INSTALLATION OF OPOSSUM
2.1 Position OPOSSUM® in such a way
that the rear part B coincides with the child
seat of the bicycle. Place the front part of
OPOSSUM® on the bike saddle and pass the
safety belt buckle through the buttonhole E,
at the height of the crotch.
Secure OPOSSUM® in the correct position
with the supplied adhesive Velcro D. After
having cleaned the surface of the bicycle
childseat and identified the most suitable
point, apply the sticky part of the Velcro D.
The anti-slip fabric of OPOSSUM® will ensure
a perfect seal.
Xa
2.3 From the back of the seat, pull and
join the straps Xa and Xb with the Velcro.
Make sure that the non-sticky Velcro and
the sticky one are well adhered and taut for
most of their length.
®
2.2 Under the seat there are 2 straps with Velcro
Xa and Xb. Take the Xa strap and pass it through
the highest hole in the leg of the seat. Repeat the
Caution: If the model of seat does not have the
leg structure, the strap Xa/ Xb must be passed on
the outside of the seat, beyond the footrest bar.
Xa
12
ON YOUR BICYCLE
E
same operation with Xb strap.
B
Xb