Tristar AC-5495 Manual De Usuario página 17

Auto function
This feature is designed to switch to a certain temperature to be used only as a fan, above this
temperature the device will automatically turn to the air conditioning mode (cooling).
Example: Turn the power on by pressing the on/off button (I),
Select the COOL mode with the mode function button (F), set the temperature to 25°C. Then
select the AUTO mode by pressing the mode function button (F), the lights COOL and AUTO
come on To 25°C FAN function is, from 25°C the device cools.
If the temperature falls below the 25°C the FAN mode comes on again. Attention! The
minimum set temperature in the AUTO mode is 25°C, when a lower temperature is selected,
the device cools only to 25°C.
Timer function
Press the timer function button (C) and set the desired number of hours, from 1 up to 24 hours.
The timer function is available in the cooling, fan and auto mode.
Example:
•
Set in 2 hours during the off mode, the machine will begin two hours later with the last set
mode.
•
Set in 2 hours, while the unit is in operation, the device automatically stops 2 hours later.
Sleep function
This feature only works in the cooling mode. Press the sleep function button (D).
The temperature raises in the first and second hours, respectively, 1°C per hour. Then the
device keeps the temperature down. After 12 hours in sleep mode the device will automatically
turn off. When using the sleep mode the unit automatically turns in low fan speed.
Remote control
Place the battery in the remote behind the flap on the back. Point the remote at the device and
select the desired functions on the remote control.
P
Q
K Control light, lights up when the buttons are operated.
L Function button, cooling, ventilation or automatically.
M On/Off key
N Fan speed control button.
O Temperature setting button, right temperature up and left temperature down.
P Sleep function button.
Q Timer function button.
K
L
M
N
O
16