Assembly - WHITES ELECTRONICS TM 808 Manual Instructivo

1) Remove all parts from the shipping carton, taking note of how the instrument
fits into the inserts. Save this carton (and inserts) for future storage or travel.
See back cover for further Carton / Carry case instructions.
2) Assemble the front loop or antenna as shown, by compressing the button on
the short rod protruding from the front of the control box, sliding the loop onto this
short rod, and aligning the button on the control box short rod with the hole on
the front antenna so that it locks into place. Use the thumbnut and bolt to further
sucure the antenna.
3) Assemble the rear loop or antennas as shown, by compressing the button on
the short rod protruding from the rear of the control box, sliding the loop onto this
short rod, and aligning the button on the control box short rod with the hole on
the rear antenna so that it locks into place. Use the thumbnut and bolt to further
sucure the antenna.
4) Continue by reviewing the next section on Batteries.
Front Loop (Antenna)
Thumbnut
&
Bolt
Assembly Instructions
Control Box
Meter
Short Rod
Front Of
Control Box
Handle
Control
Panel
Short
Rod Rear Of
Control Box
Thumbnut
Bolt
(4)
Battery
Rear Loop
Pack
(Antenna)
&