General Description
This KEEPER
Winch is equipped with a series wound, 12 Volt DC motor and is designed for
®
INTERMITTENT GENERAL DUTY USE. This electric winch is similar to most electric motor driven tools and
should not be allowed to become overly hot. Stop winch if motor starts to labor or end of motor becomes
hot to the touch. Stop winching and allow motor to cool down. Minimum electrical requirements are 60 amp
alternator and battery with 650 CCA (cold cranking amp) capacity. This Winch (FIGURE 2) is not intended
for use in lifting/hoisting applications and the manufacturer does not warrant it to be suitable for such use.
The Freespool Clutch disengages the gearbox to allow the wire or synthetic rope to be pulled out without
using electric power. A Remote Switch with 15' lead and wireless switch allows a wide variety of mounting
options.
Wireless Switches (2)
Battery Leads
*BATTERY NOT INCLUDED
KX9.5 Shown
12V DC PERFORMANCE
Line Pull Lbs. (kg)
0
2000 ( 907)
4000 (1814)
6000 (2722)
8000 (3629)
9500 (4310)
Rolling Load Capacities (1st Layer)
SLOPE*
Lbs.
Kgs.
*SLOPE: a one (1') rise over ten (10') feet in length equals a GRADE of 10%. A 10% grade is equal to a 5.71o incline
angle. A 100% grade equals a 45o angle of incline.
4
Line Speed FPM (MPM)
28.3 (8.6)
16.6 (5.1)
12.2 (3.7)
9.8 (3.0)
8.1 (2.5)
4.2 (1.3)
10% (5.7o)
20% (9o)
48,450
22,980
15' Handheld Switch
4-Way
Roller Fairlead
(KX9.5)
Motor Amp Dr
80
160
220
260
310
360
40% (18o)
32,400
20,900
14,700
9,480
FIGURE 2
Aluminum
Hawse Fairlead
(KX9.5S)
*MOUNTING PLATE NOT INCLUDED
Pull By Layer Lbs. (kg)
1 @ 9500 (4310)
2 @ 8075 (3662)
3 @ 6864 (3113)
4 @ 5834 (2646)
60% (27o)
16,150
7,320
100% (45o)
13,600
6,170