Specifications; Product Specifications; Parts And Accesories - BEAL NPBR155/84H Manual De Usuario

Specifications

Product Specifications

Width of Cut
Drive System
Engine Start
Fuel Tank Capacity
Overall Machine Width
Turning Radius
Ground Speed
Height-of-Cut
Wheel Size
Grass Catcher Capacity
Unit Weight
Engine Displacement
Engine Net Power
Engine Power Rating Information
The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive
Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and
corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower values
are derived at 3600 RPM. Actual gross engine power will be lower and is affected by, among other things, ambient operating
conditions and engine-to-engine variability. Given both the wide array of products on which engines are placed and the
variety of environmental issues applicable to operating the equipment, the gas engine will not develop the rated gross power
when used in a given piece of power equipment (actual "on-site" or net power). This difference is due to a variety of factors
including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application
limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine variability. Due to
manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this Series
engine.
Parts and Accessories
Replacement Parts
We recommend that you see any authorized Beal/Briggs
& Stratton Dealer for all maintenance and service of the
tractor/engine and parts.
28
84 cm
Hydrostatic
Electric
6 Liters
92 cm
55 cm
Forward: 7 km/hr @ 2750 rpm
Reverse: 4 km/hr @ 2750 rpm
30 to 90 mm
Front: 33 cm
Rear: 41 cm
200 Liters
215 kg
500 cc
9,12 kW
Accessories
See an authorized Beal Dealer for a list of the available
accessories.
en en en