Tabla de contenido
Idiomas disponibles
Idiomas disponibles
In the clock's main screen, the following information can be found:
?? Current attenuation level
?? Date
?? Time
The blinking colon ( : ) between the hours and the minutes is the marker for the
seconds.
1. Basic Controls
Keypad lock
screw
To configure the TSL these three keys are used:
: enter / set value
: next / increment value
: previous / decrement value
In order to enable the keypad, it is needed to unscrew the keypad lock screw.
Once this has been done, the keypad is active and it is possible to configure the
TSL.
From the TSL main screen and pressing
seconds, the TSL Function Menu will appear. Using this menu the functions of
the TSL can be programmed.
When a bypass of the unit is needed, but it is not desired to program it as a
"Bypass Date", pressing
switch the TSL mode automatically to BYPASS. This is only working from the
TSL main screen. The following message will be display on the screen:
TSL Mode:NIGHT
Fri 27/09 12:23
and
and
simultaneously during the 3 seconds will
TSL Mode:BYPASS
SET when done
27
simultaneously during 3
Capítulos
Tabla de contenido
