Programming - AEB SPIDER Manual Instructiones De Montaje Y Garantia

Programming

The SPIDER Timing Advance Processor can be
reprogrammed, therefore only one Timing Advance Processor
model can be adapted to different car models, simply updating
the software inside it by means of the AEB011 programming
kit that has been used until now to reprogram the OBD2
Emulators.
Please, take into account the fact that during the testing phase
the SPIDER Timing Advance Processor is programmed with
the 511N software, therefore you must always check if it is
suitable for the car on which it must be installed.
The SPIDER Timing Advance Processor Code AEB511N
replaces the previous model MOUSE in all its versions.
Enclosed to these instructions, you will find a list of the cars
on which you can install the SPIDER Timing Advance
Processor with the relevant indications on the software to be
used.
The installation wiring diagrams of every single car instead
are available in our AEB On - Line range; if you do not have
it, please apply to your local dealer.
English
1 4
IS511N REV. 120406 - 1