How to connect your Broadcaster Headset to a
smartphone or tablet
1. Turn down your audio device to the lowest level.
2. Place the headset on your head and adjust the headband
until the headset ts comfortably. Adjust the microphone to
t properly.
3. Insert the 3.5mm plug of the Broadcaster Headset into your
smartphone or tablet.
4. Raise the audio to a comfortable volume on your device and
then adjust the volume on the Broadcaster Headset using the
volume dial.
NOTES:
• The volume dial only controls the volume of the headset.
Console and device volume should be adjusted separately.
• Make sure that the Broadcaster Headset is worn properly at
all times. Do not place the headset around the back of your
head; it must be worn over the top of your head. Make sure
you allow the microphone to be positioned as close to your
mouth as possible for best voice results.
• When the microphone is switched to "OFF", other players
cannot hear your conversation, but you will still be able to
hear them speaking.
Important safety precautions
• Do not listen at a high volume level. Extended high volume
levels can lead to permanent hearing loss.
• Start with se ing the volume level at the lowest volume and
adjust until you reach a comfortable volume level.
• Do not use while sleeping, as accidents may occur.
• If you experience any ringing in your ears, try lowering the
volume. If the ringing persists, visit your physician.
• Tampering with the product can result in damage to your