User Instructions - EASYHOME 809A Fox Manual Del Usuario

User instructions

Before first use
Check to make sure all parts are included and that there is no damage to the unit
or its parts. Place the humidifier on a non-metallic, lint free, waterproof, level
surface for best performance. This is to help disperse the mist in the air and
prevent it from being knocked or tipped over.
•
Be sure the humidifier is turned OFF and the humidifier is unplugged from the
electrical outlet.
•
Select a location for your humidifier on a flat surface approximately 4 inches
away from a wall. DO NOT place humidifier on a wood surface.
•
DO NOT place the humidifier on a finished floor or near furniture which can be
damaged by moisture or water. Place on a waterproof surface.
•
DO NOT place humidifier on top of a towel, or a carpeted surface. This may
cause the humidifier to overheat.
•
DO NOT move the humidifier while a full water tank is on the base. Water may
leak into the base causing a malfunction.
How to operate
1. Be sure the humidifier is off and is unplugged from the electrical outlet.
2. Lift the water tank off the humidifier base holding the bottom of the tank with
both hands.
3. Turn over the water tank and unscrew the water tank cap at the bottom of
the tank by turning it counterclockwise.
4. Fill water tank with cool tap water; do not fill all the way to the rim.
IMPORTANT: NEVER add medication, additives, salt or vapor pad to the water
tank. ONLY essential oils can be added directly into the water tank.
5. Replace the water tank cap, aligning the threads on the tank with the threads
on the cap, and turn it clockwise.
6. Turn the tank over, holding one hand by the top handle and another hand
under the water tank.
7. Place the water tank onto the base. Make sure it is laying flush into the base.
There should not be a space between the tank and base.
NOTE: Do not move the humidifier while a full water tank is on the base.
Water may leak into the base causing a malfunction.
10
User instructions