Attach Terminal To The Adapter Plate - Rockwell Automation Allen-Bradley 2711P-RAK4 Instrucciones De Instalación

Kit de adaptador de corte para terminal de teclado panelview plus 400/pantalla táctil panelview plus 600

Tabla de contenido

Idiomas disponibles

Cutout Adapter Kit

Attach Terminal to the Adapter Plate

1. Insert the new terminal into the front of the enclosure until the terminal gasket is

flush with the adapter plate.

Nut and Washer

Adapter Plate

2. Insert 4 mounting levers into the mounting slots of the terminal (as shown below).

Slide each lever until flat side of lever touches the surface of the panel.

Mounting Slots

3. When all levers are in place, slide each lever an additional notch or two until you hear

a click.

Publication 2711P-IN020A-MU-P

Mounting Levers

Flat Side of Lever

Rear of Panel or

Enclosure

Rear of PanelView Plus

400 Keypad or 600

Touch Terminal

Mounting Lever

Tabla de Contenido

Tabla de contenido