Idiomas disponibles
Idiomas disponibles
User Guide
IMPORTANT! READ AND FOLLOW
THESE INSTRUCTIONS CAREFULLY AND
KEEP FOR FUTURE REFERENCE.
Congratulations on the purchase of your new
Nomi Chair. We believe that family meal time is
special; conversation, socialization, and special
moments all occur around the dining table.
With your new Nomi, you've made sure that
everyone is included, even the youngest family
members! With the Nomi you will give your child
a comfortable and ergonomic chair that will take
them from toddler to teenager and beyond. Your
Nomi can be accessorized with Cushions, sold
separately.
Assembly of the Nomi Chair
Please find an assembly video at
www.evomove.com or on our YouTube channel.
The Nomi Chair is assembled with the 6 supplied
screws (H), using one of the 2 small Allen
wrenches (J2) you find stored under the footrest
(D), plus the large Allen wrench (J1) you find in
the hardware bag attached to the bases (E).
IMPORTANT! Always use the supplied TufLock®
coated screws as they provide a necessary
strong grip. They are a little tough to tighten, but
once done they don't need to be re-tightened as
often.
Assemble on a level surface and start by atta-
ching the base as shown in Figure 1 on page 1.
Insert the long metal tube (I1) into the inside bot-
tom hole in one base and the short tube (I2) into
the top hole of the same base. Slide the metal
tubes into the wood stem (A) with the wheel poin-
ting backwards and then slide the second base
on. Insert 4 screws and use two Allen wrenches
to tighten the base to the stem. Hold one screw
with the small Allen wrench, tighten the screw
on the opposite side with the large Allen wrench.
Repeat on the second set of screws. Insure
there is no gap between the stem and the bases.
Tighten and re-tighten all screws from both
3
sides until all 4 screws are secure. Retighten
the screws 2-3 weeks after assembly and
when necessary.
Next attach the backrest (B) to the top of the
stem, and secure with the remaining 2 screws,
using the small Allen wrench. When finished,
store the 2 small Allen wrenches in the bottom of
the footrest for future tightening of the screws.
Attach the footrest (D) and the seat (C) as shown
in Figure 1 on page 1, following the instructions
below.
IMPORTANT! The adjustment knobs (F) need to
be carefully attached to the bolts on the seat and
footrest. Prior to shipping, they are attached,
inspected and correctly threaded.
To attach the footrest, unscrew the adjustment
knob, remove the plastic washer (G), and insert
the flat metal bolt through the track in the stem.
Place the washer back on the bolt with the
groove facing out, and very carefully thread the
knob onto the bolt using only your fingers. Make
sure it threads correctly. DO NOT use force
until you feel it is threaded correctly. If need
be, back it out and try again.
Repeat this step with the seat, insuring it is posi-
tioned all the way up on the stem.
Adjusting the seat and footrest
Adjust the height of the seat and footrest by tur-
ning the two knobs to loosen. Adjust the seat
height first. The seat height is correct when the
child sits in the chair with their elbows at tabletop
level while holding the arms close to the body, Fi-
gure 2A on page 2. The footrest is at the correct
level when the child's feet are flat and their knees
are at a 90° angle, Figure 2B on page 2.
Holds an adult
The Nomi is tested up to 330 lbs (150 kg), so it is
strong enough for full size adults as well.
Cleaning and Care
Clean with a damp cloth and a mild detergent.
Certain colored foods may discolor the plastic.
Shoe marks on the base may be removed by
using a white cleaning eraser. The color of the
chair might fade over time if exposed to direct
sunlight.
Made with care
The Nomi Chair is made as environmentally
responsible as possible. All plastic is recyclable.
The wood in the stem is certified by the Forest
Stewardship Council. All fabrics comply with the
Oeko-Tex® Standard 100. Nomi is certified to not
contain harmful chemicals and substances.
WARNING
•
Always place the chair on a level and sturdy surface and make sure there is room for
the chair to slide backwards.
• Read all instructions before assembling the chair and keep small parts away from
children. Do not use chair if it's damaged or broken.
• Never leave small, toxic or hot objects close to the chair that may be within reach of a
small child.
• Never place the chair near an open fire or other sources of strong heat like electric or
gas heaters due to the risk of burns.
• Remember to retighten all screws 2-3 weeks after assembly of the chair. Continue to
regularly re-tighten when necessary.
• Do not use accessories or spare parts which are not made by Evomove for the Nomi
Chair.
EN
Warranty
IMPORTANT! Immediately register your Nomi
Chair so we can contact you in the unlikely event
of a safety recall. Register online at
www.regallager.com/RegisterNomi or mail in the
attached registration card.
Evomove A/S warrants to the original purcha-
ser that this product will be free from defects
in material and workmanship for 2 years from
the date of the original purchase. Evomove A/S
will, at its option, repair or replace this product if
found to be defective in material or workmanship.
This warranty does not cover the effects of
normal wear and tear or damages resulting from
negligence, improper assembly, modification,
accidents, misuse or abuse of this product.
4
