Ega Master 57541 Manual De Instrucciones página 29

Note:
1. If is appears, that means this wrench has ever been applied over than 110% of
torque of the spec.
2. When using track mode, if you apply torque over 5 N-m, the LCD display will start to display
the torque value. If the applied torque is less than 5 N-m, the LCD display does not change
the value aplied before. The smallest torque for 62955 and 62959 is 0.5N-m.
3. The green LED will be on for 80%, 85%, 90%, 95% and 97.5% of maximum setting torque.
4. The red LED will be on 100% of maximum setting torque.
TRACK MODE OPERATION
29