Switching On And Off - TechniSat DigiPal 2 TX e Guía Rápida

Functions that belong together are grouped in menus. The chosen function is highlighted in color.
On the bottommost line, the "function keys" are highlighted with red, yellow, green and blue bars.
These bars have different functions in each menu that are called up by pressing the respective
colored key (multi-function key) on the remote control. The "function keys" are only active when
the shortcut symbol is shown in the particular field.
Help
If included, a help text can be faded in or out by pressing the blue function key in the menu.
Initial Installation
When operating the unit for the first time, the start window of the installation assistant Auto Install
appears. Please follow the instructions on the screen.
If the initial installation is not run or canceled, the unit will be started with the standard
configuration.
For daily use

Switching on and off

> Turn on the Digital-Receiver by pressing the On/Standby button on the remote control or on the unit
itself.
> By pressing the button again, the unit is turned off.
Choosing programmes
Using the up/down keys:
> Switch programmes, one at a time, using the up/down programme keys on the remote control or on the
unit.
Using the number pad:
> Us ing the number pad input the programme number. For example:
1
1, then 4
2, then 3,
When inputting programme numbers, you have about 3 seconds after pressing a key to complete
the number. If you have a single or double-digit number to input, you can speed up the process by
holding the last key pressed.
Using the programme list:
> Press the "OK" key.
> Now you can choose the programme you wish by using the up and down arrow keys.
> By pressing the "OK" key, the highlighted programme is selected.
> With the up and down arrow keys, you move the highlighted area up or down one line.
> With the left and right arrow keys, you change list pages.
Returning to the last selected programme:
> By pressing the "back" key on the remote control, the last selected programme is re-selected.
> Press the key again and the last programme seen is selected.
After each programme change, an Info box appears with the programme number and name of
for programme 1
for programme 14
then 4 for programme 234.
5