Technical Service; Warranty; Compliance With Local Laws And Regulations; Troubleshooting - VWR RL20 Manual De Instrucciones

Technical service

Web Resources
Visit the VWR's website at www.vwr.com for:
• Complete technical service contact information
• Access to VWR's Online Catalogue, and information about accessories and related products
• Additional product information and special offers
Contact us For information or technical assistance contact your local VWR representative or visit. www.
vwr.com.

Warranty

VWR International warrants that this product will be free from defects in material and workmanship for a pe-
riod of 24 month from date of delivery. If a defect is present, VWR will, at its option and cost, repair, replace,
or refund the purchase price of this product to the customer, provided it is returned during the warranty period.
This warranty does not apply if the product has been damaged by accident, abuse, misuse, or misapplication,
or from ordinary wear and tear. If the required maintenance and inspection services are not performed ac-
cording to the manuals and any local regulations, such warranty turns invalid, except to the extent, the defect
of the product is not due to such non-performance.
Items being returned must be insured by the customer against possible damage or loss. This warranty shall
be limited to the aforementioned remedies. IT IS EXPRESSLY AGREED THAT THIS WARRANTY WILL BE
IN LIEU OF ALL WARRANTIES OF FITNESS AND IN LIEU OF THE WARRANTY OF MERCHANTABILITY.

Compliance with local laws and regulations

The customer is responsible for applying for and obtaining the necessary regulatory approvals or other au-
thorizations necessary to run or use the Product in its local environment. VWR will not be held liable for any
related omission or for not obtaining the required approval or authorization, unless any refusal is due to a
defect of the product.

Troubleshooting

Review the information in the table below to troubleshoot operating problems.
PROBLEM
1. Optical System
LED does not light.
Light too dim on the sample
CAUSE
Power cord is unplugged.
Only one sector is lit up.
Intensity set too low.
6
SOLUTION
Plug power cord into the power outlet.
Press the sector buttons to switch the LEDs
on.
Press the sector buttons to switch the LEDs
on.
Adjust the intensity knob.