Dispensing Process; Sleep Mode - Brewista NutraMilk BRNMC2L Serie Manual Del Usario

◦
◦
◦

Dispensing Process

•
◦
◦
◦
◦
◦
Note: For best performance, please allow your machine to cool down for 7 minutes before
starting the next cycle.
❹

Sleep Mode:

• Your NutraMilk will enter "Sleep mode" automatically after 20 seconds of inactivity.
The brightness of the LCD readout (16) will dim in order to save power.
Touching any button will turn the machine back on and the LCD readout's (16)
•
brightness will return to normal.
For best results, Brewista recommends powering off and unplugging your NutraMilk
•
after each use.
8
To stop the mixing process, press the START/STOP button (22) again at any
time. The unit will display "00" on the LCD readout (16). Pressing any function
button will also stop the mixing process.
As the machine's cutting blade (3) turns, the combined water and butter are
pressed through fine 100 grade mesh filters on either side of the inner filter (5),
sifting out fine particles and emulsifying the nut butter in the water.
The filtered milk fills the outer portion of the mixing basin (8) until the process
is complete.
Place a glass or plastic storage container beneath the dispensing spigot (11) of
the machine.
Once the mixing process is complete, press the DISPENSE button (21)
(Illus. I) and then the START/STOP button (22) (Illus. J).
Press the DISPENSE button (21) at any time to stop this process. The LCD
readout (16) will display "00" when the process has been cancelled.
Lift dispensing spigot's (11) lever while the machine is running and add your
freshly made milk to the storage container (Illus. K).
Refrigerate alternative milk after dispensing. Alternative milk will remain fresh
for 5-6 days when stored in an airtight container inside a refrigerator.
I J K