Conformity Of The Product With Legislation; Storage Of The Manual; Use Of The Product / Installation; Operating The Product - shada 700311 Manual Del Usuario

LED's work
05 Security related information
When using the product, make sure the unit is sufficiently ventilated, never cover the unit
during operation and keep it out of reach of children or animals. This product is not a toy,
LED lights are extremely bright and looking directly at the light source during operation can
lead to serious eye damage. Any other use of the device than described in the manual may
damage the product or cause danger to the user, e.g. due to a short circuit, fire or electric
shock. The safety instructions must be observed at all times.

06 Conformity of the product with legislation

The warranty expires in the event of damage due to non-compliance with the safety in-
structions of the device. Furthermore, we are not liable for consequential damage, damage
to objects or persons resulting from failure to observe the safety instructions and improper
use/handling of the device due to wear and tear. Product design and specifications are sub-
ject to change without notice. All logos and trade names are registered trademarks of their
respective owners and are hereby acknowledged as such.

07 Storage of the Manual

Please read the operating instructions carefully and completely before use. The operating
instructions are part of the product, they contain important information on the commission-
ing and handling of the device. Keep all enclosed operating instructions for future reference.
If the device is sold or passed on to third parties, you are obliged to pass on the operating
instructions as these are lawfully part of the product.

08 Use of the product / Installation

Before use, check the completeness of the parts supplied and the intactness of the product.
If damaged, it must not be put into operation.
1. Charge the work light completely before the first use. NOTE use a maximum of 2A
charger.
2. When the work light is fully charged (~ 4 hours) all indicator LEDs wil light up.
3. To dim the lamp, hold down the on/off button for a long time.
4. After use, store the work light indoors. Avoid storage in extremely high or low tempera-
tures, as this will negatively affect the lifespan of the battery.
Attention: when the working light is stored longterm (>6 months), charge it regularly. This
will prevent deep discharge of the battery. As this is normal for Lithium-Ion batteries, a deep
discharge does not form grounds for a refund or reclamation.
To pair a Bluetooth® speaker:
1. Press the Bluetooth® button (side) for 10 seconds to switch on the speaker.
2. The Bluetooth® indicator light (backside above the battery indicator) now flashes
quickly.
3. Now connect your music player to the speaker.
4. Briefly press the Bluetooth® button to switch off the speaker.
5. If you want to reconnect to the same music player, just switch on the speaker by briefly
pressing the Bluetooth® button.

09 Operating the product

The safety instructions and warnings must be observed to ensure both the perfect condition
of the product and safe operation.
5