Alarm Settings - Akai AC-151W LIGHTY Manuel Del Usuario

DIMMER CONTROL
The DIMMER button (9) allows you to set the brightness of the LED display to
high and low 2 levels (low & high).
1. The clock display with dimmer low is the default setting.
2. It will consume more power if you set the clock display with dimmer higher.
Press the alarm set button
time. Afterwards keep depress the alarm set button (6/7) over 2 seconds to enter
the alarm set mode. After enter the setting mode, press the alarm set button
(6/7) to change the mode cycle as follows:
Normal → AL 1 Hour → AL 1 Min → AL 1 weekday Alarm → AL 1 wake beep
→ AL 1 wake radio → AL 1 wake radio volume → Light → Light intensity →
Normal → AL 2 Hour → AL 2 Min → AL 2 weekday Alarm → AL 2 wake beep
→ AL 2 wake radio → AL 2 wake radio volume → Light → Light intensity →
Select the alarm weekday mode as follows
1-5: Monday to Friday
1-7: Whole week
6-7: Saturday & Sunday
1-1: One day of week
Action (during data adjustments)
- Press button (2) to adjust data backward.
- Press button (4) to adjust data forward.
- Keep depress
- Press (6) or (7) to confirm each setting.
Alarm duration
Beep alarm or radio alarm will continue output for 30 minutes if no key press,
then it will stop automatically and wait for same alarm time on next day.
Enable/disable the alarm
Press and hold the
alarm is activated, AL1 or AL2 will be appeared on the display.

Alarm settings

(6) or (7) during normal mode to show the alarm
Normal.
Normal.
or button for 2 seconds to enable auto forward.
(6) or (7) button to enable or disable the alarm. Once the
20