Idiomas disponibles
Idiomas disponibles
Timed
dosage LED
Timed time-pause dosage
LED
Function selector
Constant
dosage LED
Pulse display LED
Regulations can be made by working on the regulation knob on the front of the pump
Alarms
Display
Fixed alarm LED
Fixed alarm LED
Flashing alarm LED
Fixed alarm LED. Function mode LED
switch off .
The Hayward ZTA is a proportional pump with analogical interface.
The SEL button can be used to select the various operating modes. The selection of the dip-switches inside the
pump allows for greater function specialisation.
Hayward Flow Control
Control Panel – HAYWARD ZTA
Flow rate % regulation
50
time on
25
time on
time off
min
100%
c
Electrical connections
Cause
Level alarm
With the flow alarm active, the pump
has not received any flow signals for at
least six consecutive pump strokes.
Memory alarm: the pump receives one
or more pulses during dosage
System
FAILURE
alarm
problem)
www.haywardflowcontrol.com
potentiometer
90''
45''
135''
75
75
180''
0
0
90''
30'
15'
135''
45''
45'
180''
0
60'
Level probe, flow and
memory alarm LED
1
Alarm relay
2
3
Not used
4
6
Input frequency signal, free contact
(water-meter pulse-sender /
remote signal)
7
8 Dip-switch
B Input level control / Flow sensor
Restore the liquid level
Press the SEL button
Press the SEL button
(hardware
Check circuit.
1-888-INDL (1-888-429-4635)
Time On
regulation
potentiometer
Time Off
regulation
potentiometer
Interruption
ZTAIOM
Pg. 1 of 3
