GPO WINCHESTER Manual Del Usario página 13

EQ Operation
1. Press MENU/INFO button
2. Rotate "Tone" and press to adjust "Main menu"
3. Rotate "Tone" and press to adjust "EQ", you can choose "Rock"
"Classic" "Jazz" "Bass" etc.
DAB Mode Operation
1.
the display shows "DAB". Press "Scan" button to activate a full station
search. A progressive bar will show the progress of the scan and the
number of stations found during the scan. The stations scanned will be
stored automatically when the scan is complete.
You may see some symbols displayed alongside the station names,
these are defined as follows:
* ? – This indicates that the station is not active or available
* >>- This symbol indicates that the station is a primary station
*<<- This symbol indicates that the station is a secondary station
2. The first station available will be played automatically.
3. You can rotate " Tune +/- " to switch among stations stored.
4. Rotate "Tune +/- " clockwise or anticlockwise to seek your favorite
stations.
5. Rotate "Volume +/-" to adjust the volume.
6. To store a station preset, you must first tune to the station you wish
to set as a preset. Then press "Preset" button to activate store function.
"Preset Empty 1" will be displayed on lower line of the screen, and the
number "1" will flash. Rotate "Tune +/- " to scroll through the numbered
preset locations (1-20), press and hold "Select" button to store the
GPO_Winchester_user_Manual EU - Sept 2018 V1.indd 13
Switch to DAB mode, press "Function" button repeatedly until
13
10/09/2018 09:21